Stainless steel circular gear pump

YCB series stainless steel circular arc gear pump is mainly used for all kinds of mechanical equipment of conveying lubricating oil in the lubricating system, suitable for conveying viscosity of 5 x 10-6-1.5 x 10-3 m2 / s (5-1500 CST), the temperature is below 200 ℃ with lubrication oil.Can transport non - lubricating oil, beverage, corrosive liquid.Copper gear can be used to transport low internal liquid, such as gasoline, benzene, etc.In addition to the general motors, this series of pumps can also be equipped with the same specifications of anti-explosion motors according to the needs of users.

YCB series stainless steel circular arc gear pump applicable scope: in the oil transportation system can be used for transmission, pressure pump;It can be used as a fuel pump for conveying, pressurizing and spraying in the fuel system.It can be used as hydraulic pump to provide hydraulic power in hydraulic drive system.It can be used for lubricating oil pump in all industrial fields.

YCB stainless steel circular arc gear pump structure characteristics: using the international is believed to pump a continuous contact gear, that is, double circular plus composite tooth sine curve, can completely eliminate the involute gear pump.YCB arc pump for a continuous contact between the two meshing tooth profile, won't produce trapped oil phenomenon, solved the involute gear pump pump caused by trapped oil phenomenon, bearing vibration and noise of the phenomenon such as load increases.Therefore, the circular arc gear pump has efficiency, low noise and good energy-saving effect.