RY Heat conduction oil pump

RY series heat pump this pump is reasonable in structure, good in performance and reliable in use.

Suitable for conveying high temperature liquid without solid particles.

Its corrosion resistance and operating temperature depend on the materials of the main parts in contact with the media (divided into three categories: 1.HT200; 2.

II. The ZG230-450;

III. 1 cr18ni9ti OCr18Ni12 - Mo2Ti)

The scope of application of RY heat conduction pump is RY series heat conduction pump

1. Petroleum and chemical industry

2. Oil industry

3. Synthetic fiber industry

4. Textile printing and dyeing industry

5. Plastics and rubber industry

6. Paper industry

7. Timber industry

8. Construction industry

In addition, RY series heat pumps are also widely used in machinery industry, food industry, pharmaceutical production, oil supply circulation system of hot oil furnace and heat oil heating circulation system.

Performance range of RY heat conduction pump (per design point)

1. The flow rate is 1-500m cubed per hour;

2. Head 10-125m;

3. Temperature -20 is absolute C;

- 350 DHS C.

RY series of heat conduction oil pump by my company technical department of product design improvements repeatedly, through practical experiments have proved that my company a new generation of RY series of heat conduction oil pump in the normal use will be able to put an end to the medium leakage phenomenon!

Especially for the permeable media such as: similar to the medium of nine - carbon oil.

Structure introduction of RY heat conduction pump

The RY type heat pump is a single-stage cantilever structure, which is divided into foot support and center support. The inlet of the pump is axial suction and the outlet is vertical upward.

Pump and drive motor are mounted on the same base by elastic coupling.

No cooling system is required for the whole unit.

RY series heat conduction pump is mainly composed of shell, rotor, bearing, seal and other parts. It adopts packing seal structure and adds heat resistant oil seal, which ACTS as auxiliary seal.

The pump and motor are connected by three - claw elastic coupling.

RY series of heat conduction oil pump on the pump from the design changed the traditional structure of hot oil pump, the cooling system of using natural cooling, reduce the volume of the pump, the structure is simple, save operating cost, safe and reliable.