KCG Type high temperature gear oil pump

KCG type high temperature gear pump mainly consists of gear, shaft, pump body, safety valve and shaft end seal.The gear has high hardness and strength after heat treatment, and is installed with the shaft to operate in a replaceable sleeve.The lubrication of all parts in KCB gear oil pump is achieved automatically by using output medium when the pump is working.

KCG type high temperature gear oil pump service scope

KCG type heat pump is suitable for conveying containing no solid particles and fibers, non-corrosive, high temperature liquid medium temperature can reach 250 ℃, the viscosity of 5 to 1500 CST.

This type of gear oil pump is suitable for the medium viscosity is not more than 150 was/S, the temperature is not higher than 120 ° C, non-corrosive, does not contain hard particle impurities and fiber of heavy fuel oil, diesel oil, machine oil, vegetable oil and other liquid properties similar.This type of gear oil pump is mainly used in oil, chemical industry, metallurgy, mining, power stations and so on the transfer of oil medium, pressure, fuel injection, etc, and large mechanical equipment in the thin oil loop, can be done in all kinds of mechanical equipment lubrication pump is used.

KCG type high temperature gear pumps for use

Plastics and rubber processing industry, textile printing and dyeing industry, coating industry, wood processing industry, food industry, paper printing and other industries such as liquid heat carrier heating.

KCG type high temperature gear oil pump structure characteristics

This series of high temperature gear pumps consists of gear, shaft, pump cover, shaft end seal and other parts, all parts are made of suitable temperature resistant materials.The running parts of the pump are lubricated by the medium they transport.

The KCG type high temperature gear pump is equipped with safety valve, which can prevent the damage of pump and motor caused by overloading.