2CY Stainless steel gear pump

2 cy series gear pump is mainly used for stainless steel of all kinds of mechanical equipment conveying lubricating oil in the lubricating system, suitable for conveying viscosity of 5 x 10-6-1.5 x 10-3 m2 / s (5-1500 CST), the temperature is below 300 ℃ with lubrication oil.Stainless steel gear pump, no lubricating oil, beverage, low corrosive liquid.Copper gear can be used to transport low internal liquid, such as gasoline, benzene, etc.In addition to the general motors, this series of pumps can also be equipped with the same specifications of anti-explosion motors according to the needs of users.

Ending range

It can be used as transmission and pressure pump in oil transportation system.It can be used as a fuel pump for conveying, pressurizing and spraying in the fuel system.It can be used for lubricating oil pump in all industrial fields.

Terminal characteristic

This series of gear pump mainly consists of gear, shaft, pump body, safety valve and shaft end seal.The gear has high hardness and strength after heat treatment, and is installed with the shaft to operate in a replaceable sleeve.The lubrication of all parts in the pump is achieved automatically by using the output medium when the pump works.

Reasonable oil discharge and return tank are designed in the pump, which is the least torque force the gear can bear in the work. Therefore, bearing load is small, wear is small, and pump efficiency is high.

The pump is provided with a safety valve as overload protection. The full return pressure of the safety valve is 1.5 times of the pump's rated discharge pressure. It can also be adjusted according to actual needs within the allowable discharge pressure range.However, please note that this safety valve cannot be used as a relief valve for a long period of time.

Seen from the extension end of the spindle to the pump, clockwise rotation.

High flow gear pumps, gear pumps, unloaded pumps, pumps, crude pumps, Marine gear pumps, etc.

Traffic: 1.1 m3 / h - 600 m3 / h.Pressure: 0.28MPa--2.5MP.

Mainly used for oil field, oil depot, port, dock, ship and other large flow oil transfer, oil unloading!