Contact Us : +86 13102708628

E-MAiL : jinhai@btjhpump.com

Asphalt insulation pump, stainless steel external lubrication pump, high viscosity rotor pump, screw pump_Botou jinhai pump manufacturing co.,ltd
YCB Circular stainless steel heat preservation pump
YCB Circular stainless steel heat preservation pump

YCB Circular stainless steel heat preservation pump

YCB arc stainless steel heat pump is mainly used for various machinery and equipment of conveying lubricating oil in the lubricating system, suitable for conveying viscosity of 5 x ..
ORDER NOW
PRODUCT DETAILS

YCB arc stainless steel heat pump is mainly used for various machinery and equipment of conveying lubricating oil in the lubricating system, suitable for conveying viscosity of 5 x 10-6-1.5 x 10-3 m2 / s (5-1500 CST), the temperature is below 300 ℃ with lubrication oil.YCB circular arc stainless steel heat preservation pump can transport non-lubricating oil, beverage and low corrosive liquid.Copper gear can be used to transport low internal liquid, such as gasoline, benzene, etc.In addition to the general motors, this series of pumps can also be equipped with the same specifications of anti-explosion motors according to the needs of users.

YCB series stainless steel circular arc gear pump USES

YCB series stainless steel circular arc gear pump is suitable for conveying containing no solid particles and fibers, non-corrosive, temperature is not higher than 80 ℃, the viscosity of 5 x 10-6-1.5 x 10-3 m2 / s (5 to 1500 CST) nature of lubricating oil or other similar oil liquid.

YCB series stainless steel circular arc gear pump application scope

(1) it can be used as a transmission and pressure pump in the oil transportation system;

(2) in the fuel system, it can be used as a fuel pump for conveying, pressurizing and spraying;

(3) the hydraulic pump that can be used to provide hydraulic power in the hydraulic drive system;

(4) it can be used as lubricating oil pump in all industrial fields;

YCB arc heat pump structure features: stainless steel insulation YCB arc stainless steel pump adopts the advanced international is considered pump continuous contact point of gear, that is, double circular plus composite tooth sine curve, can completely eliminate the involute gear pump.YCB arc pump for a continuous contact between the two meshing tooth profile, won't produce trapped oil phenomenon, solved the involute gear pump pump caused by trapped oil phenomenon, bearing vibration and noise of the phenomenon such as load increases.Therefore, the circular arc gear pump has efficiency, low noise and good energy-saving effect.This series of gear pump mainly consists of gear, shaft, pump body, pump cover, bearing sleeve, shaft end seal and so on.The gear is made of double arc sine curve tooth.It is the most prominent advantage compared with involute gear tooth profile in gear meshing process there is no relative sliding, so the tooth surface abrasion, smooth operation, no trapped fluid phenomenon, low noise, long life and high efficiency.YCB circular arc pump is free from the constraints of traditional design, making gear pump enter a new field in design, production and use

The YCB circular arc stainless steel heat preservation pump is provided with a safety valve for overload protection. The full return pressure of the safety valve is 1.5 times of the rated discharge pressure of the pump.It can also be adjusted according to actual needs within the allowable discharge pressure range.However, it is important to note that this safety valve cannot be used as a relief valve for a long time.

YCB circular stainless steel heat preservation pump shaft end seal design is two forms, one is mechanical seal, the other is packing seal, can be determined according to the specific use situation and user requirements.


NEWS INFORMATION

14

Jun

How to use gear pump gear pump gear pump correctly?

Gear pump oil pump gear oil pump drive shaft can't bear any radial vertical force and lateral drive way, higher floor str...

14

Jun

Basic performance parameters of high pressure gear pump

The working pressure of high pressure gear pump refers to its output pressure.That is, oil must be built up to overcome r...

14

Jun

Hydraulic gear pump placement mode and its requirements

When the gear rotates, the melt into the suction chamber two gear tooth, with gear running, the melt from either side int...

14

Jun

The service scope and structural characteristics of roots pump

Suitable for transportation of crude oil temperature is not higher than 140 ℃, oil, weak alkaline liquid syrup, yeast.I...